DJI RS 3 | Handheld Professional Gimbal
Ready When You Are
The DJI RS 3 delivers a flexible and efficient shooting experience to both solo creators and independent crews. Lightweight and sleek, it provides professional stabilization and efficient control for more creative freedom and endless possibilities. DJI RS 3 is a stabilizer for commercial shooting.
Key Features include:
- Automated Axis Locks
- 3 kg (6.6 lbs) Tested Payload
- 3rd-Gen RS Stabilization Algorithm
- Bluetooth Shutter Button
- 1.8" OLED Touchscreen
- Max 12hr Battery Life
Get Started Right Away
It's All About Speed
With dual-layered quick-release plates, mounting a camera onto the RS 3 is quick and easy, with no need to re-balance the gimbal after swapping out a new battery or memory card.
A newly added fine-tuning knob on the tilt axis allows the camera to slide forward or backward with millimeter-grade precision to achieve accurate balancing more easily when changing lenses.
Automated Axis Locks
RS 3 lets you get up and running instantly. When the gimbal is powered off, press and hold the power button, and the three axes unlock while the gimbal expands automatically, allowing you to start working within seconds. By pressing the power button once, the axes automatically lock and enter sleep mode, making transportation and travel significantly more efficient. Press and hold the power button and it will fold and lock automatically.
Wireless Shutter Control
By implementing Dual-Mode Bluetooth, RS 3 supports wireless shutter control,  saving time and effort with every use. After the initial Bluetooth pairing, you can control video and photo shooting by simply pressing the record button on the stabilizer. Previously paired cameras will automatically reconnect after the first use, eliminating the need for a camera control cable.
Excellent Weight-to-Payload Ratio
Weighing only 1.3 kg/2.8 lbs (including gimbal, battery grip, and quick-release plates), the RS 3 can be held easily in one hand, while its 3kg/6.6lb load capacity is more than enough to support mainstream cameras, including the Sony A7S3 or Canon R5 with a 24-70mm F2.8 lens.
3rd-Gen RS Stabilization Algorithm
Thanks to a next-generation RS stabilization algorithm, the RS 3 delivers enhanced stability in any scenario. According to laboratory testing, the RS 3 provides a 20% increase in stability over RSC 2, allowing you to effortlessly manage low-angle shots, run scenarios, or switch between high and low positions.
When you need even smoother results, turn on SuperSmooth mode. The RS 3 will increase motor torque to further enhance stabilization, delivering stable footage even in fast-moving scenarios or while using 100mm-equivalent focal lenses.
All Within Reach
Fast Parameter Setting
1.8" OLED Touchscreen
In comparison to the black and white screen of RSC 2, RS 3 is equipped with a 1.8-inch OLED full-colour touchscreen with an 80% larger display. It also supports most Ronin app settings, offering straight-forward and accurate control together with the redesigned user interface.
Instant Mode Switching
By simply sliding the new gimbal mode switch, you can alternate between Pan follow, Pan and Tilt follow, and FPV modes. The FPV mode selection is also customizable to 3D Roll 360, Portrait, or Custom, allowing you to adjust your equipment and get started quickly.
Customizable Front Dial
Rotating the front dial allows you to control zoom or focus. It can also be customized to control the camera's shutter, aperture, ISO,  or gimbal movements, making it exceptionally convenient for single-handed use.
Efficient Video Transmission
Monitoring via Smartphone
The RS 3 supports the Ronin Image Transmitter (previously known as the Ronin RavenEye Image Transmitter) to transmit 1080p/30fps HD live feeds directly to a mobile device. The maximum transmission distance is 200 metres  and the end-to-end transmission latency is as low as 60 ms.  For wireless monitoring, a smartphone can also be attached to the NATO port on the RS 3 using the phone holder.
Integrated Monitoring and Control
You can remotely adjust camera exposure directly in the Ronin app,  or control the gimbal with the virtual joystick to obtain an integrated monitoring and control experience.
With the Ronin Image Transmitter, a smartphone can be used as a motion controller to remotely control the RS 3 gimbal for more versatile and dynamic camera movements.
Focus on Creation
A Battery Built for Pros
The new RS 3 battery grip features a cartridge design, making it easier to swap batteries and is smaller for storage compared with RSC 2. It can even be charged independently from the gimbal.
12-Hour Operating Time + Fast Charging
The new battery grip provides an extended runtime of up to 12 hours,  enough to handle continuous shooting throughout the day. It supports 18W PD fast charging with a charge time of only 2.5 hours. It can even be used while charging which enables the RS 3 to be powered almost indefinitely.
New Briefcase Handle
The redesigned briefcase handle is foldable for convenient storage, and comes with a new ergonomic handle to make it easier and faster to install and switch to Briefcase mode. The built-in cold shoe mount and 1/4"-20 mounting holes can connect to external monitors for shooting assistance, making low-angle camera movements more intuitive.
All-New Focus Motor
The next-generation DJI RS Focus Motor (2022) provides torque three times stronger (up to 1 N·m) and audible noise is reduced by 50%. This delivers a smoother focusing experience and reduces the effect on audio recording. It also adopts a quick-release structure, allowing it to be assembled quickly and effortlessly without the use of any tools.
Vertical Camera Mount
Install the Vertical Camera Mount to attach the camera vertically to the RS 3 while avoiding camera ports, allowing easy portrait shooting at different angles for high-quality social media content.
Multiple Operation Modes
Transportation and Storage
IN THE BOX
- Gimbal x 1
- BG21 Grip x 1
- USB-C Charging Cable (40 cm) x 1
- Lens-Fastening Support x 1
- Extended Grip/Tripod (Plastic) x 1
- Quick-Release Plate (Arca-Swiss/Manfrotto) x 1
- Multi-Camera Control Cable (USB-C, 30 cm) x 1
- Screw Kit x 1
- Check the camera compatibility list for detailed information on supported camera models.
- Requires camera control cable. Check the camera compatibility list for detailed information on supported camera models.
- Sold separately.
- Tested in a closed environment in favorable conditions and an unobstructed wireless signal using the FCC and SRRC standard (max 100 m using the CE standard). Actual results may vary.
- Measured with the equipment in a level and stationary state, the gimbal balanced, three axes in an active state, and the battery only powering the gimbal.
- Some accessories sold separately.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.